Troubleshooting Cisco IP Telephony and Video 300-080 exam sample questions Passtcert

This is why thousands of candidates depends Passtcert one of the important reason. We provide the best and most affordable, most complete Troubleshooting Cisco IP Telephony and Video 300-080 exam sample questions to help them pass the exam.Don't need a lot of time and money, only 30 hours of special training, and you can easily pass your first time to attend Cisco certification 300-080 exam. Passtcert are able to provide you with Troubleshooting Cisco IP Telephony and Video 300-080 exam sample questions which are closely similar with real exam questions.Only to find ways to success, do not make excuses for failure.
Share some CCNP Collaboration 300-080 exam questions and answers below.
Where in Cisco TMS would you see if a system is registered to a Cisco VCS or a Cisco Unified Communications Manager? 
A. Systems > Registration 
B. Navigation > Systems > Registrations 
C. under Registration on the System Administration tab 
D. System Overview 
E. Settings > Provisioning 
F. where you start the Cisco Unified Communications Manager RTMT under Systems and Reports 
Answer: D

A user using a CP-9971 SIP phone reports that during a video call, the video portion of the call freezes. What should you do in order to point to and troubleshoot the issue? 
A. Restart the phone. 
B. On the phone, navigate to Administrator Settings > Status > Call Statistics > Video > Video statistics > Rcvr Packets statistics. Verify if the phone is receiving packets. 
C. Make sure that the camera is connected to the USB. 
D. Verify if the camera shutter is open. 
E. Perform a factory reset of the phone. 
Answer: B

Which two issues can prevent an IP Phone from receiving an IP address via DHCP? (Choose two.) 
A. The DHCP server is not on the same VLAN as the phone. 
B. The DHCP scope's leases are exhausted. 
C. DHCP Option 150 is incorrect. 
D. The TFTP server is not reachable. 
E. The DHCP scope is not defined for the subnet of the phone. 
Answer: A,B

What is a common reason that an IP Phone cannot get its configuration from Cisco Unified Communications Manager after it obtains the correct IP address information? 
A. The DHCP scope is exhausted. 
B. The DHCP server is not reachable. 
C. The DHCP scope is on the wrong subnet. 
D. The DHCP scope has the incorrect Option 150 or 66 defined. 
Answer: D

When identifying Cisco TelePresence Endpoint traffic characteristics, which three statements are true? (Choose three.) 
A. Latency, jitter, and loss are measured in a round-trip fashion. 
B. Latency, jitter, and loss are measured unidirectionally. 
C. Latency and loss are measured at a packet level, based on RTP header sequence numbers and time stamps. 
D. Latency and jitter are measured at a packet level, based on RTP header sequence numbers and time stamps. 
E. Jitter is measured at a video frame level, by measuring the arrival time of the video frame versus the expected arrival time. 
F. Jitter is measured at a packet level, by measuring the arrival time of the packet versus the expected arrival time. 
Answer: B,C,E 

The the probability of passing Cisco certification 300-080 exam is very small, but the reliability of Passtcert can guarantee you to pass the examination of this probability.If you buy Passtcert Troubleshooting Cisco IP Telephony and Video 300-080 exam sample questions, you will solve the problem of your test preparation. You will get the Troubleshooting Cisco IP Telephony and Video 300-080 exam sample questions which have the highest quality. Buy our products today, and you will open a new door, and you will get a better future.

Currently, Passtcert uniquely has the latest Troubleshooting Cisco IP Telephony and Video 300-080 exam sample questions.Success is has method. You can be successful as long as you make the right choices. Passtcert Troubleshooting Cisco IP Telephony and Video 300-080 exam sample questions are tailored specifically for IT professionals. It can help you pass the exam successfully. If you're still catching your expertise to prepare for the exam, then you chose the wrong method. This is not only time-consuming and laborious, but also is likely to fail.